Thermador TCM24RS Guía De Uso Y Cuidado página 33

en
Problem
Too little milk froth, none at
all, or the milk system is not
taking in any milk�
The personally selected
volume is not reached�
Coffee dispensing slows to a
trickle or stops completely�
Hot water milky or tastes of
coffee�
Coffee has no "crema"�
Coffee is too "acidic"�
Coffee is too "bitter"�
Cause
Build-up of limescale in the
appliance�
Beverage outlet or one of the
3 connections are blocked�
Milk not suitable for foaming� Do not use milk that has
Beverage outlet or the milk
tubes are not correctly
assembled�
The suction pipe is blocked�
Coffee is ground too finely.
Preground coffee is too fine.
Heavy build-up of limescale
in the appliance�
The brewing unit is soiled�
Milk tube has not been
removed�
Milk or coffee residue in the
beverage outlet�
Unsuitable type of coffee�
The beans are no longer
fresh�
The grinding level is not
suitable for the beans�
The grinding level is too
coarse� Preground coffee is
too coarse�
Unsuitable type of coffee�
Coffee is ground too finely.
Preground coffee is too fine.
Unsuitable type of coffee�
Solution
Descale the appliance
according to the instructions,
see the section "Service
programs"�
Clean the beverage outlet
and the connections�
already been boiled� Use
cold milk with a fat content of
at least 1�5%�
Moisten the individual parts
and put them together again�
Clean the suction pipe�
Adjust the grinding level
to a coarser setting� Use a
coarser ground coffee�
Descale the appliance
according to the instructions,
see the section "Service
programs"�
Clean brewing unit, see
chapter "Cleaning the
brewing unit"�
Remove the milk tube from
the milk container�
Clean the beverage outlet�
Use a type of coffee with a
higher proportion of robusta
beans�
Use fresh beans�
Adjust the grinding unit to a
finer setting.
Adjust the grinding unit to
a finer setting. Use a finer
ground coffee�
Change the type of coffee�
Adjust the grinding level
to a coarser setting� Use a
coarser ground coffee�
Change the type of coffee�
29