Important; Maintenance And Repair - Clarke CTV7 Libro De Instrucciones

Tabla de contenido

Publicidad

Figure 7
2
Figure 8
Page
-22-
MACHINE OPERATION
Changing The Bag Type Filter
1. Pull the bag-type filter sleeve off the inlet fitting.
See Figure 7.
2. Dispose of the used bag-type filter in accordance
with the local waste disposal regulations.
3. Place a new bag-type filter into the tank as de-
scribed in the instructions printed on the filter.

IMPORTANT!

Push the bag-type filter sleeve completely
onto the inlet fitting.
Replacing The Filter Element
1. Switch off the machine and pull the plug of the
power cord out of the plug socket.
2. Remove the machine top section from the dirt tank
and place to one side with the filter element facing
upwards (Figure 8).
3. Remove the outer strainer filter bag.
4. Unscrew the filter retaining nut (1) and remove.
5. Pull off the filter element (2).
6. Push on a new filter element.
7. Fit the filter retaining washer and tighten the
retaining nut.
8. Dispose of the used filter element in accordance
with the local waste disposal regulations.
9. Reinstall the outer strainer filter bag.

MAINTENANCE AND REPAIR

CAUTION: Before cleaning and servicing the
machine, always remove the power cord.
Carry out only maintenance operations described in
these operating instructions. Use only original Clarke
spare parts.
CAUTION: Do not make any technical
modifications to the machine. Your safety
could be endangered as a result!
For all other maintenance and repair work,
please contact an authorized Clarke Service
department.
®
Clarke
Wet/Dry Vacuums Operator's Manual

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ctv7 w/as/eCtv15Ctv20Ctv15 w/squCtv20 w/squ02170a ... Mostrar todo

Tabla de contenido