Installing Software - Olympus DS-50 Manual De Instrucciones

Installing Software

Before you connect the recorder to your PC and use it, you must first install the DSS player
software from the included Software CD.
Applications included with "DSS Player"
• DSS Player: Recorded voice files can be downloaded to the PC for complete file management and
playback solution.
Be sure to confirm the following before installation:
• Exit all running applications.
• Eject the floppy disk if you are using one.
• You need to log on as an Administrator.
1
Insert DSS Player into the CD-
ROM drive.
The installation program will start
automatically. Once the program starts,
jump to step 4. If it does not, follow the
procedures in steps 2 and 3.
2
Click the [start] button and select
[Run].
3
Enter "D:\setup.exe" in the [Open]
field and click [OK] .
This is assuming the CD-ROM drive is D.
4
The installation
Selection dialog box opens.
Click the desired language to select it.
Language
7
69