Introduction; Optional Equipment - Jensen VM9213 Manual De Operación

INTRODUCTION

Congratulations on your purchase of the Jensen VM9213
Mobile Multimedia Receiver.
It's a good idea to read all of the instructions before beginning
the installation. We recommend having your Jensen VM9213
installed by a reputable installation shop.
Features
DVD
• Aspect Ratio - Full and Normal
• Fast Forward - 2X, 4X, 8X and 20X
• Slow Motion - 1/2, 1/4, 1/6 and 1/7
• Play, Pause, Stop, Next Chapter and Previous Chapter
CD / MP3 / WMA
• ID3 Tag Compatible
• Directory Search (MP3 / WMA Only)
• Direct Track Access via Remote Control
• Burn up to 1500 MP3 and WMA Files onto a DVD+R /
RW
• Audible Forward / Reverse Track Search (CD-DA Only)
• Random, Repeat and Intro
• Play, Pause, Stop, Next Track and Previous Track
Tuner
• USA, A. America 1, Arabia, China, S. America 2,
Europe, Korea Frequency Spacing
• 30 Station Presets (18 FM / 12 AM)
• Auto Stereo / Mono
• Auto Store
Chassis
• 1.0 DIN (Import / ISO-DIN Mountable)
• Motorized Flip-Out / Flip-Up LCD Screen
• 8 Character / Segment Type Secondary LCD Display
• 7" TFT Active Matrix LCD with Anti-Glare Coating
• 336,960 Sub Pixels (1440W X 234H)
• Pixel Pitch – 0.321W X 0.370H
• Screen Tilt / Angle Adjustment
• Beep Tone Confirmation (On-OFF Option)
• Heat Management System – Forced Air Cooling to keep
the chip sets operating at nominal temperatures
General
• Navigation Ready (NAV102 Only)
• Bluetooth Ready (with purchase of BTM10) providing
hands-free profile for safety / convenience and A2DP
profile for streaming music from a PDA / PMP
• 44-Key Infrared Remote Control
• Composite Video Output for an Additional Screen
• Two Audio / Video Auxiliary Inputs for Game Console,
Camcorder, Navigation, etc.
• Three-Band Tone control (Bass, Mid and Treble) with
Eight Preset EQ Curves
• Front, Rear and Subwoofer Line Output
• Programmable Volume Control
• Rear Camera Input (Normal and Mirror Image View)
• Touch Screen Calibration Mode
• 100-Ohm Preamp Line Output – All Audio Channels
• 2VRMS Line Output – All Channels
• Rotary Encoder Audio Control
• RCA Audio/Video Input
• SWC Interface – Compatible with PAC adapter SWI-PS
Steering Wheel Control Interface, sold separately

Optional Equipment

• NAV102
The VM9213 is "navigation ready." Before accessing
any navigation features, you must purchase and install
the navigation module (NAV102). All installation and
operating instructions will be included with the
navigation module.
Once the navigation module is connected and operating
properly, the NAV source mode will become active.
While the navigation module is not installed, the NAV
option appears gray, indicating the function is not
available.
• BTM10
Before you can connect to a Bluetooth enabled device,
you must purchase and install the Jensen BTM10.
• Bluetooth Phone
See "Bluetooth Operation" on page 19.
• Rear Camera
The VM9213 is "camera ready." Before accessing any
camera features, you must purchase and install a rear
video camera. Once the rear camera is connected and
operating properly, the CAMERA source mode will
become active. While the camera is not installed, the
CAMERA option appears gray, indicating the function is
not available.
WARNING! To reduce the risk of a traffic accident (except
when using for rear view video camera or navigation)
never use the video display function while driving the
vehicle. This is a violation of federal law.
WARNING! Never disassemble or adjust the unit.
1
WARNING! To prevent injury from shock or fire, never
expose this unit to moisture or water.
WARNING! Never use irregular discs.
WARNING! To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.
WARNING! Using an improper fuse may cause damage
to the unit and result in a fire.
WARNING! The monitor employs an automatic motorized
mechanism. To prevent damage to the core mechanism,
please do not push, pull or swivel the monitor manually.
VM9213