Selecting The Frequency Band; Modifying The Angle Of The Bar Speaker - Sony HT-NT3 Instrucciones De Operación

To cancel the Secure Link function
For the Bar Speaker
Select [Off] on Step 3 above.
For the subwoofer
Hold down SECURE LINK on the rear of
the subwoofer until the on/standby
indicator turns green or flashes green.
Selecting the frequency
band
[RF Band]
You can select the frequency band
which RF channel belongs to.
1
Select [Wireless Sound
Connection] in [System Settings]
(page 36).
2
Press / to select [RF Band], then
press .
3
Press / to select the setting you
want, then press

[Auto]: Normally select this. The
system automatically selects the
strongest frequency band for
transmission.

[5.2GHz], [5.8GHz]: The system
transmits sound according to the
selected frequency band.
Tip
We recommend you to set [RF Band] to
[Auto].
Modifying the angle of
the Bar Speaker
You can modify the angle of the Bar
Speaker by attaching the supplied
stands to the bottom of the Bar Speaker.
When you place the Bar Speaker in a flat
position above eye level, detaching the
stands will ensure proper sound
orientation.
1
.
2
Tip
Turn the Bar Speaker upside
down.
Remove the protection sheet from
the double-sided tape on the
stand (supplied).
37
US