ROBLIN Eps5029017 Manual Del Usuario página 29

INSTALLATION
This hood is designed to be mounted on the ceiling/on a shelf, above a free-standing Hob (min. 650
mm), in:
• Ducting version: Evacuation to the outside.
• Recirculation version: Internal recirculation.
Sequence of operations - Installation
• Preparing for installation
• Drilling the Ceiling/Shelf and Fixing the support plate
• Connections
• Fitting the Hood canopy
• Functional Check
• Disposal of Packaging
Opening the Plate and preparing for assembly
• Unfasten the screws joining the Plate to its Cover.
• Take the Plate and position it the right way round, as shown in the figure. The pawl must
face towards the installer.
2
EN
28