Oven Racks - GE CAFÉ 30 Manual De Instrucciones

Oven Racks

Full Extension Oven Racks
CAUTION
To avoid possible burns, place the
racks in the correct position before turning on the oven.
The correct rack position depends on the kind of food
and the browning desired.
Remove and Replace Oven Racks
To remove a rack:
oven.
2. Grasp the rack by both its upper front rail and its lower
front rail and lift straight up to unlock the front rack
locks from the rack supports.
Lift to unlock front
rack locks from the
rack support
Front rack lock
3. Firmly holding onto both the upper and lower front rack
rails, pull the rack forward and remove it from the oven.
front
rail
Low Profile Oven Rack
The low profile oven rack is designed for optimized
performance when baking or broiling certain foods in
your Professional All-Gas range. It can also be used as
a normal oven rack with the full extension oven racks
as well.
49-85243-1
Lower
front
rail
front
rail
Lower
front
rail
The racks have a frame that locks into the rack supports
on both sides. Once the frame is locked into place,
always pull the rack out, by its upper front rail, to its
full extension stop position, when placing or removing
cookware.
To replace a rack:
supports (five rack positions are available including
the top position).
2. Slide the rack all the way in until the rear rack locks
are secure on the rear rack supports and press the
front rack locks onto the front rack supports.
Slide the rack all the way
in and push down to lock
the front rack locks onto
the front rack supports
3. Pull the rack all the way out to check that it is properly
engaged.
Please refer to the oven rack position table for your
and rack type for the best performance.
Front
rack
lock