Oven Racks - GE CAFE 30 Manual Del Propietário

Ocultar thumbs Ver también para CAFE 30:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Oven Racks

Full Extension Oven Racks
CAUTION
To avoid possible burns, place the
racks in the correct position before turning on the oven.
The correct rack position depends on the kind of food
and the browning desired.
Remove and Replace Oven Racks
To remove a rack:
1. Make sure the rack is pushed all the way into the
oven.
2. Grasp the rack by both its upper front rail and its lower
front rail and lift straight up to unlock the front rack
locks from the rack supports.
Lift to unlock front
rack locks from the
rack support
Front rack lock
3. Firmly holding onto both the upper and lower front rack
rails, pull the rack forward and remove it from the oven.
front
rail
49-85244
Lower
front
rail
front
rail
Lower
front
rail
The racks have a frame that locks into the rack supports
on both sides. Once the frame is locked into place,
always pull the rack out, by its upper front rail, to its
full extension stop position, when placing or removing
cookware.
To replace a rack:
1. Place the rear rack locks over and onto the rack
supports (five rack positions are available including
the top position).
2. Slide the rack all the way in until the rear rack locks
are secure on the rear rack supports and press the
front rack locks onto the front rack supports.
Slide the rack all the way
in and push down to lock
the front rack locks onto
the front rack supports
3. Pull the rack all the way out to check that it is properly
engaged.
Front
rack
lock
15

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Café 36Café 48

Tabla de contenido