Oven Racks - GE P2S975 Manual Del Propietário

ge.com
Oven rack
Oven Racks
_M1 oven racks may be cleaned by hand
with an abrasive cleaner or steel wool.
_MteI" cleaning, rinse the rocks with clean
water and dry with a clean cloth. Gray
porcelain-coated
()veil i'ac]_,4 IllaV i'ei/lain
in the oven during the selfXcleaning cycle
without being damaged. The shiny, silve>
colored
oven i'ac]cs Ill[Iv i'eillain in
the
()veil during the self-cleaning cycle, but
they will lose their luster and become
hard to slide.
It will be necessax y to grease all oven
rack side edges with a light coating of
vegetable oil after cleaning them bv hand
or in the oven. This will help maintain
the ease of sliding the racks in and out of
the oven.
Socket
]laSS COVer
Oven Light Bulbs
NOTE"The glass cover should be
removed only when cold. Wearing latex
gloves may offer a better grip.
CAUTION. Before replacing your
oven light bulb, disconnect the electrical
power to the oven at the main fuse or
circuit breaker panel.
Be sm'e to let the light cover and 1)ulb
cool completely:
For yore" safe_; do not touch a hot bulb
with bare hands or a damp cloth.
Toremove:
[]
Turn
the
glass co'_er
c()tmterch)ckwise l/4 tm'n tmfil the
tabs of the
glass
cover clear the
gr()oxes (ff th e socket.
[] Using gloves or a dr) cloth, relnoxe
the bull) b) pulling it straight out.
To
replace:
[] Use a new 130-',olt
halogen bulb,
not to exceed 50 watts.
[] Using gloves or a dry cloth, relnoxe
the bulb fl'om its packaging. Do not
touch the bulb with bare finge_.
Receptacle
[]
Push the bulb straight
into the
receptacle all the way
[] Place the tabs of the glass coxer into
the grooxes of the socket. Tm'n the
glass cover clockwise 1/4 turn to
engage.
For improved lighting inside
the oven, clean the glass cover
fl'equenfly using a wet cloth. This
should be done when the oven is
complemly cool.
[] Recomlect electrical power to
the o_, en.
3/