Service And Maintenance; Nozzle Adjustment - Speck pumps Badu Jet super-sport II Manual De Instalación

4

Service and Maintenance

Nozzle Adjustments
When setting the nozzles for basic swimming, it is recommended that you set the nozzles in such a way that each nozzle
intersects 4 feet away while breaking the surface at the same time. To help set the nozzles in position for best performance,
please follow these instructions:
1. Parts required:
Quantity 2 - 4' x 1.5" PVC Pipe
Quantity 2 - 1.5" MPT x 1.5"/1.25" Hose Adapter
Quantity 2 - Female Adapter 1.5" Slip x 1.5" FPT
2. Turn OFF the jet pump(s).
3. Insert each jet adjustment tool into jet nozzle.
4. Bring the ends of the adjustment tools together so they are touching in between the jet housings. Then raise the tools
together so the ends touch the water surface. (See Figure 19)
5. Remove jet adjustment tool.
Perspective View
Figure 19
BaduJet Nozzle Adjustment
20
Hose Adapter 1.5"
PVC Coupling 1.5"
Water Level
~12"
Side View
PVC Pipe 1.5" x 4'