Remote Controller Master/Slave Setting; Fahrenheit Switching - LG PQRCHCA0Q Manual De Instrucciones

INSTALLATION INSTRUCTION
14
Remote Controller Master/Slave
Setting
It's a function for setting in group control, or 2-
remote controller control.
1
Press button and
neouslly for more than 3 seconds.
2
Setup function code '07' pressing by
button.
3
Select Master/Slave by pressing tempera-
ture button. (00: Slave, 01: Master)
4
Press button to save.
5
Press button and
neouslly for more than 3 seconds After the
setting has been completed.
Remote
Controller
Indoor unit operates based on
master remote controller at
Master group control. (master is set
when delivering from the ware-
house.)
Setup all remote controllers ex-
Slave cept one master remote con-
trooler to slave at group control.
- Refer to eh 'Group control' part for details.
• When controlling in groups, basic operation
settings, airflow strength
weak/medium/strong, lock setting of the re-
mote controller, time settings, and other
functions may be restricted.
button Simulta-
Function Code
Master/Slave Value
button Simulta-
Function

Fahrenheit Switching

This function is used for switching the display
between Celsius and Fahrenheit.
(Optimized only for U.S.A)
1
Press button and
neouslly for more than 3 seconds.
2
Setup function code '12' pressing by
button.
3
Select Temperature unit mode by tempera-
ture button.
(00: Celsius , 02: Fahrenheit)
4
Press button to save.
5
Press button and
neouslly for more than 3 seconds After the
setting has been completed.
❈ Whenever press
heit mode, the temperature will
increase/drop 2 degrees.
button Simulta-
Function Code
Fahrenheit setting
value
button Simulta-
button in Fahren-