First Use; Attaching / Removing Attachment Comb; Cutting/Trimming - Zoofari ZTPS 6 A1 Manual Del Usuario E Información De Servicio

Zoofari ZTPS 6 A1
The fur scissors (14)
With the fur scissors (14), you can trim your pet's fur even in places which are not easily accessible
with the pet hair clippers (1).
If you have never previously cut or trimmed your pet 's fur, try to obtain in advance as much
information as possible on the subject.
If necessary, consult a vet or a professional animal keeper.

First use

DANGER! Never use the pet hair clippers (1) in the vicinity of the bath / shower or
over a sink filled with water. Proximity to water poses a risk of electric shock, even if the
device is switched off.
The sizes 3, 6, 9, 12mm are imprinted on the attachment combs (3, 4, 5, 6) to facilitate
differentiation.

Attaching / removing attachment comb

To attach or remove an attachment comb (3, 4, 5, 6), proceed as follows:
Attaching comb (3, 4, 5, 6):
1. Place the selected attachment comb (3, 4,
5, 6) down centrally on the shaving head.
2. Slide the locking mechanism of the
attachment comb (3, 4, 5, 6) over the lower
side of the shaving head until it engages, as
shown in the illustration.
You attach the blade protective cover (2) in the
same manner.
Removing comb (3, 4, 5, 6):
1. Release the locking mechanism of the
attachment comb (3, 4, 5, 6) by pressing it
over the lower side of the shaving head, as
shown in the illustration.
2. Lift the attachment comb (3, 4, 5, 6) up off
the shaving head.
You remove the blade protective cover (2) in
the same manner.

Cutting/trimming


First, familiarise yourself with the pet hair clippers (1) and try to hold the device so that you
can press the on/off switch at any time. Make sure that you are holding the device securely.
20 - English