After-Sales Service - MSA F2 X-TREM Manual De Instrucciones

After each usage, store your helmet in a protective bag or in a closed storage area
(closet, locker) sheltered from humidity, light, exhaust gases. Do not store the
helmet under extreme conditions.
Avoid hitting or dropping the helmet, which could deteriorate the shields
(split/scratch), bending the shock-absorbing system, or deteriorating the helmet's
finish layer.
Precautions: Do not apply paint, stickers, hydrocarbons, or solvents to the helmet,
the shield and the neck curtain in order to prevent the risk of damaging the
materials.
Cleaning: Use a clean soft lint-free cloth moistened in soapy water to clean the
helmet, the shield and the neck curtain. Wash the coating. Let dry normally. Do not
use a clothes dryer. To clean leather parts, apply some glycerine soap to a clean
lint-free cloth and then rub. It is not necessary to rinse the leather parts.
After each use, check each part of the helmet and, in particular, the fastening points:
• Correctly anchored
• No visible wear
• No breakage
Make sure the helmet is always properly adjusted.
Replace damaged parts by MSA GALLET original parts because they are the only
parts certified that ensure helmet conformity.
Helmet lifetime:
The helmet lifetime strongly depends on the conditions of use, such as the effects of
mechanical and thermal stress etc. We recommend checking every 2 years the
conformity of your helmet by a trained technician or authorised distributor. Do not
hesitate to contact your dealer for advice on how to maintain your helmet.
All models, accessories and spare parts are scrupulously checked before they leave
the factory.
MSA GALLET helmets and optional accessories come with a 2-year guarantee
for workmanship and parts as of the purchase date for a usage under the conditions
described in this guide.
HELMET SERVICING
AFTER SALES SERVICE
WARRANTY
GB
19