Machine Specifications; Machine Warnings; Prohibited Use - Kunzle & Tasin Bona FlexiSand 1.9 Manual De Usuario

Machine Specifications

Machine Warnings

Prohibited use

Children should be supervised
to ensure that they do not
play with the appliance. This
machine is not intended for
use by persons (including
children) with reduced
physical, sensory or mental
capabil- ities, or lack of
experience and knowledge
unless they have received
instructions regarding the
use and are supervised by a
person responsible for their
safety.
16
Motor type:
Voltage (± 5%):
Frequency:
Power:
Rated current:
Safety devices:
Recommended fuses:
Capacitors:
Motor insulation class:
Motor protection class:
Final drive speed (unloaded):
Total weight:
Diameter of disc:
Hour counter:
Height/Width/Depth:
This equipment is not suitable
for collecting hazardous dust.
1 phase
230VAC
50Hz
1.9kW
11A
16A overload switch (manual reset),
thermal protection in motor (automatic reset)
16A
50µF+145-174µF
F
IP44
145rpm
50kg
407mm
<99,999 hours
1170mm/490mm/640mm
Using the machine to move objects or moving on an incline
may cause injury or damage. The machine must only be used
to sand dry floors which are level or have a maximum incline of
2%. DO NOT use the machine to sand steps or furniture. DO
NOT sit astride the machine when it is operating.
Work surfaces may be seriously damaged if the machine is
left turning on one point while the tool is in contact with the
surface. Move the machine at constant speed.
Bona FlexiSand 1.9 Manual