Installing The Water Line - Samsung RS267TD Serie Manual De Usuario

setting up your side-by-side refrigerator

INSTALLING THE WATER LINE

Connecting the water line to the Refrigerator.
There are several items that you need to purchase to complete this connection.
Y
• 1/4" compression nut • plastic tubing
• copper tubing
1. Tighten the compression nut
- If you are using copper tubing, slip the compr ession nut
on copper tubing (not included) as shown.
- If you are using plastic tubing
compression tting.
Do not use without the molded end(Bulb) of the plastic tubing
CAUTION
2. Tighten the compression nut
3. Turn water on and check for any leakage.
Only connect the water line to a drinkable water source.
If you have to r epair or disassemble the water line, cut off 1/4" of the plastic tubing to make sure
you get a snug, leak-free connection.
When using power cord
To prevent power cor d damage, after product installation, arrange
the remaining power cord
20_ setting up
• • ferrule ferrule
into the 1/4" compr
, insert the molded end(Bulb) of the plastic tubing
into the compression tting. Do not over -tighten the compression nut .
rdware store.
(not included) and ferrule (not included)
.
Assembled)
Assembled)
into the