Installing The Water Dispenser Line; Connecting To The Water Supply Line - Samsung RF30HB Manual Del Usuario

Ocultar thumbs Ver también para RF30HB:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING THE WATER
DISPENSER LINE
A water dispenser with a fi lter is one of the helpful
features on your new refrigerator.
To help promote better health, the water fi lter
removes unwanted particles from your water.
However, it does not sterilize the water or destroy
microorganisms. You may need to purchase a
water purifying system to do that.
The water line also connects to the ice maker.
For the ice maker to operate properly, water
pressure of 20 ~ 125 psi (138 ~ 862 kPa) is
required.
If the refrigerator is installed in an area with low
water pressure (below 20 psi), you can install a
booster pump to compensate for the low pressure.
After you have connected the water line, make
sure the water storage tank inside the refrigerator
is properly fi lled.
To do this, press the water dispenser lever until the
water runs from the water outlet.
Water line installation kits are available at
extra cost from your dealer.
We recommend using a water line
installation kit that contains copper tubing
and a ¼" compression nut.

Connecting to the water supply line

1. First, shut off the main water
supply.
2. Locate the nearest cold water drinking line and
install the pipe clamp and shut off valve.
Cold water line
Cold water line
Pipe clamp
Pipe clamp
Shut off valve
Shut off valve
3. Connect the water line installation kit to the
shut off valve.
DA68-03030A-01.indb 17
DA68-03030A-01.indb 17
All manuals and user guides at all-guides.com
Connecting the water supply line to the
refrigerator
There are several items that you need to purchase
to complete this connection.
You may fi nd these items sold as a kit at your local
hardware store.
Use Copper Tubing
• ¼" copper tubing
• ¼" compression nut
• Ferrule (2pc)
English - 17
Cold water line
Cold water line
Water line installation kit
Water line installation kit
Pipe clamp
Pipe clamp
Shut off valve
Shut off valve
Use Plastic Tubing
• ¼" plastic tubing
→ Molded end (Bulb)
(1pc)
• ¼" compression nut
(1pc)
Refrigerator
Refrigerator
Compression Nut
Compression Nut
(1/4") (Assembled)
(1/4") (Assembled)
Ferrule
Ferrule
(Not supplied)
(Not supplied)
Copper tubing
Copper tubing
Plastic tubing (B)
Plastic tubing (B)
or or
(Not supplied)
(Not supplied)
(Not supplied)
(Not supplied)
Household water supply line
Household water supply line
Plastic Tubing
Plastic Tubing
(Assembled)
(Assembled)
Compression
Compression
Fitting (Assembled)
Fitting (Assembled)
Molded end
Molded end
(Bulb)
(Bulb)
Compression
Compression
nut (B) (1/4")
nut (B) (1/4")
(Not supplied)
(Not supplied)
2014. 5. 13.
2014. 5. 13.
2:15
2:15

Publicidad

Tabla de contenido
loading

Tabla de contenido