Print Server List - Belkin Wireless G Manual Del Usuario

All-In-One Print Manager
1
Print Server
2
List
3
All-In-One
4
Print Server/
Multifunction-
5
Printer (MFP)
Information
6
7
All-In-One
Print Server
8
Description
Idle Timeout
9
10
11
12
13
Status
14
15
16
17
The Print Server List will show all the Print Servers
within the network. You can find the Print Server's
information including "All-In-One Print Server
Name", "MAC ID", "IP Address", and the device
that is connected to the Print Server.
When you click on the Print Server in the Print-
Server list, you will see the "All-In-One Print
Server Description" and the "Idle Timeout" setting
for that Print Server.
This description helps users identify the location
and the name of the Print Server.
From here, each user can know his/her idle-
timeout setting. To avoid occupying the printer
overtime, each user can set the "Idle Timeout"
from "Option\General Setting". It is used to
disconnect the connection after the printer is idle
for a specified period of time. By default, there is
no timeout setting.
When you click on the printer in the Print-Server
list, you will see information including "Status",
"Computer Name", and "Contact Information".
This displays the status of the printer including
"Connected", "Idle", and "Busy". When the
status is "Connected", it indicates that you are
connecting the MFP. When the status is "Idle", it
indicates that the printer is not being used. When
the status is "Busy", it indicates that another user
is using the printer to scan, print, etc.
36