Using The Flash - Olympus CAMEDIA C-50 ZOOM Manual Básico

Using the flash

Available
modes
1
Press repeatedly until the desired flash mode indication appears.
● If
is not pressed for 2 seconds, the selection screen disappears.
2
Take the picture.
● When the flash is ready to fire, the orange lamp next to the viewfinder
lights up and the
When is blinking, the flash is charging. When
camera is ready to shoot.
Spot metering (Selecting the metering area)
There are 2 metering methods: Digital ESP metering and spot metering.
Digital ESP metering: Meters the center of the frame and the area around it
Spot metering:
Available
modes
1
Press repeatedly until
metering+ macro mode) appears.
● If
is not pressed for 2 seconds, the selection screen disappears.
2
Take a picture.
(flash stand-by) mark is displayed on the monitor.
separately to determine the optimal exposure.
Meters within the AF target mark to determine
exposure. A subject can be shot with optimal
exposure regardless of the background light (such as
when the subject is dark due to back lighting.) When
is set, you can use spot metering when shooting
up close to a subject.
(spot metering) or
Shooting
stops blinking, the
(spot
27
En