Binzel WH Instructivo De Servicio página 55

WH / WHPP
12 Disposal
For disposal, the local regulations, laws, provisions, standards and guidelines must be
observed. For the welding torch system to be properly disposed of, it first must be dismounted.
 11 Dismounting on page EN-26
12.1 Materials
This product consists for the most part of plastics, steel and non-ferrous metals. Steel and non-
ferrous metals can be molten in steel and iron works and are thus almost infinitely recyclable.
The plastic materials used are marked in preparation for sorting and separation of the materials
for later recycling.
12.2 Consumables
Oils, greases and cleaning agents must not contaminate the ground and not enter the sewerage.
These materials must be stored, transported and disposed of in suitable containers. Please
observe the relevant local regulations and disposal instructions of the safety data sheets given
by the manufacturer of the consumables. Contaminated cleaning tools (brushes, rags, etc.) must
also be disposed of in accordance with the information provided by the manufacturer of the
consumables.
12.3 Packaging
ABICOR BINZEL has reduced the shipping packaging to a minimum. Packaging materials are
always selected with regard to their possible recycling ability.
BAL.0014 • 2019-01-16
12 Disposal
EN - 27