Dometic FreshJet1500E Instrucciones De Montaje página 15

FreshJet
Attaching the roof air conditioner
See fig. a
➤ Position the roof air conditioner into the mounting opening using the conical
noses.
See fig. b
➤ Choose the suitable seal in accordance with the following table:
Roof thickness
25 – 30 mm
30 – 40 mm
40 – 60 mm
➤ Position the seal with the adhesive side on the ADB.
➤ Fasten the mounting frame (3) on the underside of the roof air conditioner with
the 4 screws supplied.
See fig. c
A
NOTICE! Risk of damage
Tighten to the specified torque.
➤ Tighten the screws using a torque spanner and a fastening torque of 2.5 Nm.
Electrical connection
The complete circuit diagram can be found in fig. i:
Item Description
1 230 Vw mains
2 Compressor
3 Fan condenser
4 Fan evaporator
5 Rotary switch
6 Thermostat
EN
Seal thickness
15 mm
30 mm
45 mm
Installation
13