Using Sleep Timer; Timer Priority - JVC CA-HXZ30 Manual De Instrucciones

To turn on or off Recording Timer after it has been
set
1
Press CLOCK/TIMER repeatedly until
"REC" appears on the display.
The REC (Recording Timer) indicator starts
flashing on the display and the
indicator remains lit.
2
To turn off the Recording Timer, press
CANCEL/DEMO.
The REC (Recording Timer) indicator goes off
from the display ("REC OFF" appears on the
display for about 2 seconds).
The Recording Timer is canceled, but the setting for the
Recording Timer remains in memory.
— Or —
To turn on the Recording Timer, press
SET/DISPLAY.
"OK " appears on the display for about 2
seconds.
The settings you have done are shown on the display in
sequence for your confirmation.

Using Sleep Timer

With Sleep Timer, you can fall asleep to music. You can set
Sleep Timer only while the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time
appears and the SLEEP indicator starts
flashing on the display.
• Each time you press the button, the time length changes
as follows:
SLEEP 10 SLEEP 20
Canceled SLEEP 120
• If the built-in clock has not been set, "CLOCK ADJUST"
appears on the display.
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator flashes slowly until Sleep Timer
activates.
CLOCK
/TIMER
(Timer)
CANCEL
/DEMO
SET
/DISPLAY
SLEEP
AUX
SLEEP 30 SLEEP 60
SLEEP 90
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time (minutes) until the
shut-off time appears for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder what
happens if the settings for these timers overlap.
Recording Timer has priority over Daily Timer and Sleep Timer.
Below are some examples.
• If Daily Timer is set to come on while Recording Timer is
operating, Daily Timer will not come on at all.
6:00
Recording Timer
Daily Timer
• If Sleep Timer is set to come on while Recording Timer is
operating, Sleep Timer will not come on at all.
6:00
Recording Timer
Sleep Timer
• If Recording Timer and Daily Timer are set to come on at
the same time, Recording Timer will activate.
6:00
Recording Timer
Daily Timer
6:30 7:00 7:30
does not work.
6:30 7:00 7:30
canceled.
6:30 7:00 7:30
does not work.
26