Chauvet Intimidator Spot 155 Manual Del Usuario página 4

Intimidator Spot 155 QRG
Fuse
Replacement
Mounting
Product
Mounting
Diagram
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
Mounting Clamp x2
Hanging/Mounting
Bracket
Bottom View
Rubber Feet (x4)
for surface
mounting
When using only one mounting clamp with this fixture, you must use a
clamp with a captive bolt to prevent accidental loosening.
Safety Notes.
4
Safety Cable
Safety Loop
Attachment
Location
Hanging/Mounting
Bracket Attachment
x2
EN