Control Buttons - Fermax VEO DUOX Guía Inicio Rápida

START GUIDE FOR MONITOR VEO DUOX

CONTROL BUTTONS

Inductive loop
label (depending
on the model)
CONFIGURING AS MASTER PANEL
Press the SW1 button 3 consecutive times quickly. After 2 seconds, a confi rmation tone is heard, and
the master panel is activated. Once having completed the monitor´s programming, we recommend
deactivate the MASTER panel by pressing the SW1 button 3 consecutive times.
HOW TO PROGRAM THE VEO MONITOR
1. INSTALL
Monitor powered for the fi rst time.
The red led blinking rapidly indicates that the monitor has not been
programmed. The fi xed red led indicates that the monitor has not been
programmed.
2. ENTER PROGRAMMING MENU
Press the button to access the "programming menu."
PROGRAMMING FROM THE PANEL
PROGRAMMING MENU
Select the icon and confi rm with
Enter the calling code for this monitor from the panel (calling code for this monitor). A different
call tone sounds, confi rming the monitor´s programming. After a few seconds the monitor returns
to standby.
2
DUOX VEO MONITOR
Digital menu for internal parameter settings and confi guration. (When
the monitor has already been programmed)
In conversation, press to open the door.
In standby, call to guard unit (if applicable).
Auxiliary function, (contact your installer).
In standby, press and it displays the option of auto-starting with
different panels. By sequentially pressing Panel 0, Panel 1, General
Panel, (depending on the available panels).
VEO monitor incorporates an OSD menu that is managed
via the monitor´s push buttons to access the terminals´user
and programming functions.
The icons displayed are managed with the corresponding
buttons located on the monitor.
, (you hear a beep in the monitor).
Code 970044b V06_18