Control Buttons - Fermax VEO DUOX Manual Del Usuario

START GUIDE FOR DUOX WIFI VEO MONITOR

CONTROL BUTTONS

F2
The white line at the bottom of the icon indicates the function that is currently in effect.
Select with
CONFIGURING AS MASTER PANEL
Press the SW1 button 3 consecutive times quickly. After 2 seconds, a confirmation tone is heard, and
the master panel is activated. Once having completed the monitor´s programming, we recommend
deactivate the MASTER panel by pressing the SW1 button 3 consecutive times.
HOW TO PROGRAM THE WIFI VEO MONITOR
1. INSTALL
Monitor powered for the first time.
The red led blinking rapidly indicates that the monitor has not been
programmed. The fixed red led indicates that the monitor has been
programmed.
2. ENTER PROGRAMMING MENU
Press the button to access the "programming menu."
PROGRAMMING FROM THE PANEL
PROGRAMMING MENU
Select the
Enter the calling code for this monitor from the panel (calling code for this monitor). A different
call tone sounds, confi rming the monitor´s programming. After a few seconds the monitor returns
to standby.
2
DUOX WIFI VEO MONITOR
Digital menu for internal parameter settings and configuration.
(When the monitor has already been programmed)
In conversation, press to open the door.
In standby, call to guard unit (if applicable).
Auxiliary function, (contact your installer).
In standby, press and it displays the option of auto-on with
different panels. By sequentially pressing Panel 0, Panel 1,
General Panel, (depending on the available panels).
WIFI VEO monitor incorporates an OSD menu that is managed
99
via the monitor´s push buttons. The icons displayed are managed
with the corresponding buttons located on the monitor.
/ the desired icon and confirm with
icon and confirm with
.
, (you hear a beep in the monitor).
Code 970167 V04_19