Unpacking - Tripp-Lite SRCOOL18K Manual Del Usuario

Unpacking

Note: Make sure the unit and attached pallet is placed on a level surface before unpacking.
After removing the protective covering, wrapping, foam insulation and other packing
1
materials (instructions found in the Unpacking Instructions guide attached to the outside of
the unit), remove the four bolts
wrench.
Remove the two shipping brackets by pulling the top lip under and away from the unit
2
Position at least one person on each side of the unit and slowly push it toward the back of
3
the shipping pallet until all four casters go over the edge of the pallet and touch the floor.
C
WARNING: Use at least one assistant when removing the unit from the pallet.
A securing the unit to the pallet with an appropriately sized
1
B .
2
3
3
A
B
C