Using The Trimmer; Cleaning The Shaver - Panasonic ES‑LV6N Manual Del Usuario

Ocultar thumbs Ver también para ES‑LV6N:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 95
►Switching the shaver head
You can change the pivot action.
FREE
The shaver head is moved to
prevent missed spots.
LOCK
You can lock the shaver head.

►Using the trimmer

1. Slide the trimmer handle up to the
"
" position so that the trimmer
stands upright.
2. Press
and use.
Press and hold the top knob (a) and
slide the trimmer handle down to
lower the trimmer.
Tips for better usage
Apply the trimmer edge perpendicular to skin and move downward.
Trimming sideburns
FREE
LOCK
FREE
FREE
LOCK
FREE
LOCK
FREE
LOCK
Pre‑shave of long beards

Cleaning the shaver

We recommend cleaning the shaver after each use.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
Apply some hand soap and some
water to the system outer foil
[A2].
2
Press
for more than
2 seconds to activate the sonic
vibration cleaning mode.
• Splashing of foam is suppressed.
• The battery capacity lamps blink in
order.
• After about 20 seconds, it will be
automatically turned off, or you can turn it off by pressing
the power switch.
3
Remove the outer foil section
[A9] and clean with running
water.
• See page 17 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the shaver in sonic
vibration cleaning mode.
• After rinsing with water, shake the shaver up and down
for a few times to remove excess moisture and then wipe
off any drops of water with a dry cloth.
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido