Switching Off - Hama 00040969 Manual De Instrucciones

5. Press the AUTO TUNING button to optimise
reception by the speakers. The automatic
frequency search starts. The search stops when
it receives a signal. The POWER / STEREO LED
changes from red to green.
A) The distance between the speakers and the
transmitter should not be greater than
7 metres when you press the AUTO TUNING
button.
B) If the reception is poor, switch to the other
channel on the transmitter (you can choose
between two channels) and press the AUTO
TUNING button again.
6. If necessary, you can amplify the bass by pres-
sing the BASS BOOST button. Press this button
again to deactivate the function.
Note:
You can carry the speakers freely from room to
room without interference. Should interference
occur, press the AUTO TUNING button to rectify
the problem.
If background noise is audible, switch the trans-
mitter to the other channel and move the speaker
to another position. You can adjust the transmissi-
on quality at any time by choosing channel 1 or 2
and pressing the Autotuning button.
The signal may become weaker if the speakers
are moved further away from the transmitter.

Switching off

1. Turning the VOLUME ON/OFF button towards
OFF until you hear a click to switch the speaker
off. The LED goes out.
2. The transmitter switches off automatically for
protection and to conserve energy when no sig-
nal is received for 2 minutes. It switches on
again automatically as soon as the transmitter
receives a signal again.
8