Troubleshooting - Velleman DVR4MQA Manual De Instrucciones

1) LAST RECORDING
Press ▲or ▼to select 'LAST RECORD' and press ENTER to play the last recording.
2) FULL LIST
Press ▲or ▼to select 'FULL LIST'. Press ENTER to obtain the full list
and a screen as shown on the right will be displayed.
Press ◄ or ► to switch pages (8 events per page)
= motion recording
= manual recording
= alarm recording
= timer recording
M = storage in master HDD (S = slave ; not available on DVR4MQA)
3) ALARM LIST
Press ▲or ▼to select 'Alarm List'. Press ENTER to obtain the alarm list.
Press ◄ or ► to switch pages (8 events per page)
If there are no alarms, the display will read "empty".
4) MOTION LIST
Lists all motion triggered recordings
5) SEARCH a recording by time
Find video recorded on a specific date (and time).

8. Troubleshooting

What may appear as a malfunction of the device may not be that serious at all and can be easily corrected. Check
the table below before contacting your DVR4MQA dealer.-
PROBLEM
HDD not found
No power
The device does not react to keys being pressed
No recorded video
The device does not start recording
No live video
NTSC image when PAL is needed or vice versa
VELLEMAN cannot be held responsible in the event of damage to or loss of programmes, data or removable
media. VELLEMAN advises you to regularly make backups onto different storage media (disc, CD-ROM etc.)
of your documents, data, files or software installed onto our product.
The information in this manual is subject to change without prior notice.
DVR4MQA
Make sure a HDD is inserted and connected and that the HDD
tray is locked.
Check power source cable connections.
Check if there is power at the outlet.
Check if it is under key lock mode.
Press MENU and ENTER simultaneously to unlock the keys.
Check if the HDD has been installed properly.
Check if 'record enable' is set to "YES"
Check camera video cable and connections
Check monitor video cable and connections
Confirm that the camera is powered
Check camera lens setting
Power down, unplug the device and press POWER and FF
simultaneously for NTSC, POWER and REW simultaneously
for PAL while replugging the power cord.
- 16 -
LAST RECORD
FULL LIST
ALARM LIST
MOTION LIST
TIME SEARCH
2003-JAN-01
2003-JAN-01
2003-JAN-01
2003-JAN-01
2003-JAN-01
2003-JAN-01
:
Page Up ►: Page Down
◄
SOLUTION
01:02:03 M
01:02:03 M
01:02:03 M
01:02:03 M
01:02:03 M
01:02:03 M
VELLEMAN