b) Recording
Your DVR4MQA offers a variety of recording modes. You can set it up to record continuously or programmed, or only
to record events ; you can even set the recording speed and resolution. All these options are set through the system
menu. If there should be a power cut during recording, the device will automatically resume recording when the
power returns. The original recording set-up will be respected.
There are 4 recording modes, during which the screen will be as displayed on
the right. Date and time are displayed, with underneath these symbols:
the recording mode symbol, followed by "
overwrite mode – when the HDD is full, the oldest data will automatically be overwritten.
When the HDD is not in overwrite mode, the OW location will show the capacity left on the HDD ; at 5GB, "5GB" will
appear in orange and a buzzer will sound. The same will happen for 4GB, 3GB, 2GB and 1GB.
1) Alarm Recording
The DVR4MQA is triggered by an alarm input and will start to record immediately, with the
The recording speed & quality will be as set in the alarm recording mode set-up.
2) Motion Trigger Recording
Recording can be triggered by motion detection. The
The recording speed & quality will be as set in the RECORD menu.
3) Programmed Recording
The DVR4MQA will follow the timer set-up to record and the recording speed & quality as set in the TIMER menu.
The
icon will appear.
4) Manual Recording
You can press the REC button to start recording immediately. The
The recording speed & quality will be as set in the RECORD menu.
c) Playback
Press PLAY: the DVR4MQA will go into play mode and will start playing the last recording.
1) Fast Forward (F.F.) & Fast Rewind (F.R.)
• Press PLAY then press
speed, 3 times for 8x, 4 times for 16x and 5 times for 32x (maximum speed).
• Press PLAY then press
speed, 3 times for 8x, 4 times for 16x and 5 times for 32x (maximum speed).
2) Slow Forward (S.F.) & Slow Rewind (S.R.)
• Press PLAY then press SLOW for slow play at half speed. Press
times for 1/16x and 4 times for 1/32x (minimum speed).
• Press PLAY then press SLOW for slow play. Press
for 1/8x, 4 times for 1/16x and 5 times for 1/32x (minimum speed).
DVR4MQA
= recording, and "OW" = HDD in
●"
for fast forward searching. Press once for double speed, press twice for quadruple
►
for fast rewind searching. Press once for double speed, press twice for quadruple
◄
symbol will appear on the triggered channel.
symbol will appear.
once for quarter speed, 2 times for 1/8x, 3
►
once for half speed, press twice for quarter speed, 3 times
◄
- 7 -
2002 - JAN - 01
01:02:03
● OW
symbol appearing.
VELLEMAN