Unpacking The Balance; Locating The Balance - Adam Equipment Nimbus NBL Serie Manual De Instrucciones

4 UNPACKING THE BALANCE

Remove the balance from the packing by carefully lifting it out of the box. Inside the box
you will find everything needed to start using the balance-
Carefully follow the quick setup guide included to assemble the balance.

5 LOCATING THE BALANCE

© Adam Equipment Company 2017
 AC mains power adapter & cord
 Stainless Steel Top Pan
 Alloy sub-pan
 Draught shield (for mg models only)
 User documentation
The balance should not be placed in a location that will
reduce the accuracy.
Avoid extremes of temperature. Do not place in direct
sunlight or near air conditioning vents.
Avoid unsuitable tables. The table or floor must be rigid
and not vibrate.
Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or large
motors.
Do not place near vibrating machinery.
Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or immerse
the balances in water.
Avoid air movement such as from fans or opening doors.
Do not place near open windows or air-conditioning
vents.
Keep the balance clean. Do not stack material on the
balances when they are not in use.
Avoid sources of static electricity. This can affect
measurement accuracy and may damage sensitive
electronics.
11