HOW TO FILL
CAUTION: Before filling unit with water, turn the power off and unplug the unit from the outlet.
NOTE: Always use two hands to carry the humidifier.
1. To remove the mist
spout, turn it to the
right until the icons
align in the "unlock"
position. Lift up to
remove the mist spout
and set it aside.
4. Place the mist spout back on the unit, making sure the
icons align in the "unlock"
by turning the mist spout to the left until the icons are
aligned in the "lock"
away any excess water from the top of the tank before
replacing the mist spout.
Lock
2. For first time use and with each new wick,
you must soak the wick before operating.
Unlock the spring loaded wick by turning the
wick holder counter-clockwise. Remove the
wick from the wick holder and soak the wick
in water for 5 minutes, or until saturated.
Return the wick to the wick holder and
secure to the humidifier top cover by turning
clockwise.
NOTE: The wick must ALWAYS be wet prior
to operating. If wick appears dry before
powering on, remove the wick and soak
according to the instructions above.
CAUTION: DO NOT operate the humidifier
without first soaking the wick. The humidifier
WILL NOT function without a wick.
position. Lock into place
position. NOTE: Be sure to wipe
Unlock
5. Plug adaptor into standard wall outlet.
To turn on, press the POWER
The POWER
when the humidifier is ON.
5
3. Fill the water tank with
clean, cool (not cold) tap
water to the MAX FILL
line. DO NOT OVERFILL.
We recommend using
distilled water if you live
in a hard water area.
NOTE: Not for use with
essential oils. Even a
few drops can ruin the
humidifier.
Button.
Button will illuminate