Set Time / Date; Enter Electricity Tariffs - brennenstuhl EM 235 Instrucciones De Utilización Y De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Note: If the power strip is not connected to the main power, the LC-display
automatically switch to stand-by-mode after about 10 seconds if no buttons are pushed.
Note: The display combination of time (CLOCK), day of the week, current voltage
(VOLTac) and line frequency Line frequency (Hz) is the standard display for the LC-
displays
.
2
Note: If you don't Press a button within 60 seconds, the LC-display
returns to standard display.

Set Time / Date

q
Note: Time and date are stored even when the LC-display
Press the FUNC-Button
i
Press the SET-Button
i
appears in the LC-display
Press the UP-Button
i
Press the SET-Button
i
Press the UP-Button
i
Press the SET-Button
i
Press the UP-Button
i
Press the SET-Button
i
switch back to the standard display.
Press the UP-Button
i
Note: In the 12-hour clock format, AM and PM indicators will appear as selected
in the LC-display

Enter Electricity Tariffs

q
Note: You have the option of entering 2 electricity tariffs (electricity tariff 1, electricity
tariff 2). This allows you to enter the day and night tariffs with their specific activation
times.
Tip! You can learn your current electricity tariffs (price per kWh) from your electrical
utility [electricity provider].
Note: At delivery, the electricity tariffs are set to 0.
Steckdosenleiste_Content_DE_GB_NL_SE_ES.indd 25
, until the CLOCK indicator appears in the LC-display
3
once. The week day display will blink and the SET indicator
4
.
2
until the day of the week appears in the LC-display
5
to confirm your entry. The time display will blink.
4
until the desired value appears in the LC-display
5
to confirm your entry. The minutes display will blink.
4
, until the desired value appears in the LC-display
5
, to confirm your entry. The LC-display
4
to choose between the 12- and 24-hour clock formats.
5
.
2
Prior to Initial Use
will
2
automatically
2
is in stand-by-mode.
2
.
2
.
2
.
2
will automatically
2
GB
23.07.14 13:23
.
2
25

Publicidad

Tabla de contenido
loading

Tabla de contenido