Measuring Power Factor; Measure Power Consumption; Display Maximum Power Consumption - brennenstuhl EM 235 Instrucciones De Utilización Y De Seguridad

connected to the main power supply or if the attached electrical device is no longer
plugged in:
- Maximum power consumption (see "maximum power consumption")
- Energy consumption (see "measure energy consumption")
- CO2-emissions (see "display CO2-emissions")
- Total energy costs (see "display total energy costs energy consumption")
- Total time (see "display total costs [for] energy consumption")
- Energy costs electricity tariff 1 and 2 (see "display costs electricity tariff 1"
"display energy costs electricity tariff 2")

Measuring Power Factor

q
Press the FUNC-Button
i
appear in the LC-display
The LC-display
i
electrical devices connected. Additionally, the LC-display
factor.

Measure Power Consumption

q
Press the FUNC-Button
i
appear in the LC-Display
The LC-display
i
devices connected. Additionally, the LC-display

Display Maximum Power Consumption

q
Press the FUNC-Button
i
TOR appear in the LC-display
The LC-display
i
measured to date with the energy cost metering device. Additionally, the LC-dis-
play shows the date and time at which the maximum power consumption was
2
registered.
The LC-display
i
Steckdosenleiste_Content_DE_GB_NL_SE_ES.indd 29
until the AMP and POWER FACTOR indicators
3
.
2
will now show in amperes the power output required by the
2
until the WATT and POWER FACTOR indicators
3
.
2
now shows in watts the current output consumed by the electrical
2
until the indicators WATT, MAX and POWER FAC-
3
.
2
now shows in watts the maximum power consumption that was
2
also shows the power factor.
2
indicates the power
2
indicates the power factor.
2
Operation
GB 29
23.07.14 13:23