Enter Overload Warning Value - brennenstuhl EM 235 Instrucciones De Utilización Y De Seguridad

18. Press the UP-Button
19. Press the SET-Button
Enter Electricity Tariff 2:
1. Press the FUNC-Button
VOLTac, AMP, WATT
2. Press and hold the FUNC-Button
PRICE 1 indicators will appear in the LC-display
3. Press the FUNC-Button
in the LC-Display
4. Repeat steps 3 – 19 under "Enter Electricity Tariff 1" to enter the values for elec-
tricity tariff 2.

Enter Overload Warning Value

q
Note: On delivery the overload warning value is set at 16.00 amperes.
Note: The maximum overload value that can be set is 16.00 amperes.
1. Press the FUNC-Button
: VOLTac, AMP, WATT
LC-display
2
2. Press and hold the FUNC-Button
PRICE 1 indicators will appear in the LC-display
3. Press the FUNC-Button
appear in the LC-display
4. Press the SET-Button
tens place in front of the comma will blink.
5. Press the UP-Button
Example: 10,00
6. Press the SET-Button
will blink.
7. Press the UP-Button
Example: 15,00
8. Press the SET-Button
will blink.
9. Press the UP-Button
Example: 15,90
Steckdosenleiste_Content_DE_GB_NL_SE_ES.indd 27
, until you reach the desired value.
5
, to confirm your entry.
4
until one of the following appears in the LC-Display
3
for about 2 seconds. The COST/kWh and
3
until the COST/kWh and PRICE 2 indicators appear
3
.
2
, until one of the following indicators appears in the
3
for about 2 seconds. The COST / kWh and
3
, until the OVERLOAD, AMP and MAX indicators
3
.
2
. The SET indicator will appear in the LC-display
4
to select between the values 0 and 1.
5
to confirm your entry. The ones place in front of the comma
4
to select from the values 0 – 6.
5
to confirm your entry. The tenths place after the comma
4
, until you reach the desired value.
5
Prior to Initial Use
.
2
.
2
:
2
. The
2
GB 27
23.07.14 13:23