Lamborghini Caloreclima EM 35-E Manual Para La Instalación Y El Mantenimiento página 45

PRESSURE CURVES - B/P GAS DELIVERY
25
21
17
13
9
5
1
2 4 6
50 100 150
56 112 168
Thermal output
MAINTENANCE
Skilled staff has to perform yearly the following operations:
- Check the valve inside tightness.
- Filter cleaning.
- Fan and head cleaning.
- Check the position of the ignition electrode tips as well as the control electrode.
- Calibrate the air and gas pressure switches.
- Check the combustion by means of CO
bearings.
- Check all the gaskets and seal tightness.
To gain access to the main components, remove the cover. Combustion
head maintenance should be made as follows:
- Unscrew the screw and remove the cover.
- Unscrew the component holder plate screws and hang the plate into
the service position.
- To gain access to the draught tube and to the electrodes, remove the
pin 6 and the screw 7, loosen locknut 8 and screw down the screw 9.
(Pt)
m
8 10 12 14
kcal/h x 10
200 250 300
kW
224 280 336 390
-CO-FUMES TEMPERATURE
2
- 45
3 Legend
/h
Pi Inlet pressure
(combustion head + gas train)
Pt Pressure at combustion head
-