Preparing For Use - Sony PlayStation Universal Remote Manual De Instrucciones

wARNING
Before using this product, carefully read this manual
•
and retain it for future reference. Additionally, read
the instructions for the PlayStation
Do not handle damaged or leaking batteries.
•
what you can do with the
Universal Remote
The Universal Remote uses Bluetooth® wireless
•
technology to operate your PS4™ system and to
control the playback of common types of media,
including Blu-ray Disc™ media.
Infrared (IR) technology enables you to operate
•
peripheral devices such as your television, AV amplifier,
and cable/satellite set-top box. For IR operation, you
must point the IR transmitter of the remote directly
at the device. Check that there are no obstructions
between the remote control and the device.

Preparing for use

Remove the battery cover on the rear of the Universal
Remote and insert 2 AAA batteries. Make sure the
batteries are in the correct position.
Operating the PS4™ system
Check the PS4™ system software version
To use the Universal Remote, the PS4
must be version 3.0 or later. You can check the system
software version by selecting
Settings -> System -> System Information.
Pairing the Universal Remote with a PS4
This operation is performed only once, when you are
using the Universal Remote for the first time.
1. Turn on the PS4
2. From the PS4
Devices -> Bluetooth Devices.
3. On the Universal Remote, press the PS4
4. Next, press and hold the SHARE button and the
PS button simultaneously until the red LED begins
to flash.
SHARE &
PS buttons
5. Place the remote close to the PS4
wait for "PDP Universal Remote" to appear in the
device list.
6. Using a connected controller, select "PDP Universal
Remote" from the list, and press the "X" button.
When prompted, select "Yes".
system.
™
system menu, select Settings ->
™
4 system.
®
system software
™
system
™
device key.
™
system and
™