Device Buttons - Sony PlayStation Universal Remote Manual De Instrucciones

7. The red LED on the remote will illuminate for 3 seconds
and then turn off, indicating successful pairing.
8. If pairing is unsuccessful, repeat steps 3 through 6.
Note: The remote will enter sleep mode after 30 minutes
of inactivity. To wake the remote, press the PS button or
PS4 device button. Sleep mode does not affect TV, CBL,
or AMP operation.
Tips
For the latest PS4
•
user's guide for the PS4
(manuals.playstation.net/document/).
For the latest Universal Remote instructions, refer to
•
the online user's guide
Only one Universal Remote can be registered with the
•
PS4 system at a time.
™
When you pair the Universal Remote with another
•
PS4 system, registration with the original PS4
™
system is cleared. To use the remote with the original
PS4 system, you will have to follow the pairing
™
procedure again.
How to use the Universal Remote

DEVICE buttons

Switch between devices.
PS4 ™ system button
TV button
AMP button
CBL button
Buttons for operating a PS4
amplifier, or cable/satellite set-top box
The meaning of the icons shown in the table below is
as follows:
(PS4) used to operate the PS4
(TV) used to operate the TV
(AMP) used to operate the AV amplifier
(CBL) used to operate a cable/satellite set-top box
Operating a TV, A/V amplifier, or
cable/satellite set-top box
You can use the Universal Remote to operate a TV, A/V
amplifier, or set-top box. Set the remote code to match
the product in use.
usage instructions, refer to the
™
(support.pdp.com)
Switch the remote to operate the PS4
Switch the remote to operate an AV amplifier
Switch the remote to operate a cable/satellite set-top box
system
™
Switch the remote to operate a TV
system, TV, AV
™
system
™
.
™
Device Buttons
™ system