How To Set The Time, Day And Date - Seiko 6R21 Instrucciones

HOW TO SET THE TIME, DAY AND DATE (FOR CAL. 6R21)
• Check that the watch is operating, and then set the time, day and date.
• The watch is provided with a day and date function and is designed so that the
day and date changes once every 4 hours. The date changes around 1 o'clock
midnight, and the day around :00 a.m. If AM/PM is not properly set, the date
will change around 1 o'clock noon, and the day around :00 p.m.
1. Pull out the crown to the first click. (The second
hand continues moving and the accuracy of the
watch is unimpaired.)
. The day can be set by turning the crown clock-
wise.
. The date can be set by turning the crown coun-
terclockwise. Turn it until the previous day's date
appears.
Ex.) If today is the 6th of the month, first set the date
to "" by turning the crown counterclockwise.
CAUTION
• Do not set the date between :0 p.m. and :00 a.m. If you do, the date
may not change properly / it may cause a malfunction.
10
4. Pull out the crown to the second click when the second hand is at the 1 o'clock
position. (The second hand stops on the spot.)
Turn the crown to advance the hands until the date changes to the next. The time
is now set for the a.m. period. Advance the hands to set the correct time.
. Push the crown back in to the normal position in accordance with a time signal.
AUTOMATIC
•
AUTOMATIC
CAUTION
The mechanism of mechanical watches is different from that of quartz
watches.
When setting the time, be sure to turn back the minute hand a little be-
hind the desired time and then advance it to the exact time.
11