Playing Mp3 Or Wma Cds - Insignia NS-H4005 Guia Del Usuario

Insignia NS-H4005 Home Theater System

Playing MP3 or WMA CDs

For MP3 or WMA CDs to be playable, they must meet the following
requirements:
• MP3 files must have the .mp3 file extension. WMA files must
have the .wma file extension.
• MP3 and WMA file names are limited to eight or less
characters, and cannot contain special characters, such as
/ : * ? < or >.
• The total number of files on a CD should be less than 650.
• A single-session CD must have an MP3 or WMA in the track
one slot.
• The recording software you use to create an MP3 or WMA CD
must be able to create a "file system." Not all software can do
this. We recommend Easy-CD Creator.
• The CD-R physical format should be ISO9660.
• Sampling frequency should be 44.1 kHz for MP3 and 32 to
44.1 kHZ.
• Bit rate should be between 32 and 320 kbps for MP3 and 32 to
128 kbps for WMA.
To play an MP3 or WMA CD:
1 Insert an MP3 or WMA CD in the disc tray, then close the tray.
2 Press
The MP3/WMA folder menu opens.
MP3 WMA
or to select MP3/WMA, then press MEMORY/ENTER.
Program
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Folder7
Folder8
00:00
www.insignia-products.com
Clear All
OFF
33