Searching By Time On A Dvd; Marking A Starting Point On A Dvd - Insignia NS-H4005 Guia Del Usuario

Insignia NS-H4005 Home Theater System

Searching by time on a DVD

To search by time on a DVD:
1 During playback, press DISPLAY. The on-screen display opens
and shows the elapsed playing time.
2 Within 10 seconds,
appears.
3 Within 10 seconds, use the number button to enter the amount of
time you want to skip forward on the DVD. If you enter the wrong
time, press CLEAR, then enter the time again.
4 Within 10 seconds, press MEMORY/ENTER. Your home theater
system skips forward to the time you specified, then starts
playback. If you enter an invalid time, playback continues
normally.

Marking a starting point on a DVD

Note
You can mark as may as nine markers on a DVD.
To mark a starting point on a DVD:
1 Begin playing a DVD.
2 When you reach the point where you want to begin playback,
press MARKER. The Marker icon appears briefly on the TV
screen.
3 Repeat Step 2 to add additional markers.
Recalling a marker
To recall a marker:
1 During playback, press SEARCH. The MARKER SEARCH menu
opens.
2 Within 10 seconds, press
want to recall.
3 Press MEMORY/ENTER. Your home theater system goes to the
marked point on the DVD.
4 Press SEARCH to close the MARKER SEARCH menu.
or to select the Time Search icon. -:--:--
or to select the marker number you
www.insignia-products.com 39