Troubleshooting - Insignia NS-H4005 Guia Del Usuario

Insignia NS-H4005 Home Theater System
4 Press the
then use the
character.
5 After you enter the label, press MEMORY/ENTER.
6 Press MEMORY/ENTER on the remote control. The station name
is stored.

Troubleshooting

Check the following guide for the possible cause of a problem before
contacting service.
Symptom
No power.
The power is on, but your
home theater system
does not work.
No picture.
No sound.
or button to enter the first character of the label,
or buttons to go to the next or previous
Cause
The power cord is
disconnected.
No disc or videotape is
inserted.
The TV is not set to
receive your home
theater system signal
output.
Your home theater
system is set to TV
mode.
The video cable is not
connected securely.
The connected TV power
is turned off.
Digital Audio Output is
set to the wrong position.
www.insignia-products.com
Solution
Plug the power cord into
a power outlet, and make
sure that the outlet is
supplying power.
Insert a disc or videotape.
The disc or videotape
indicator lights in the
display window.
Select the appropriate
video input mode on the
TV so the picture from
your home theater
system appears on the
TV screen.
Press the TV/VCR button
on the remote control
repeatedly to select VCR
mode. TV indicator
disappears from the
display window.
Connect the video cable
securely.
Turn on the TV.
Set Digital Audio Output
to the correct position,
then turn on your home
theater system again.
53