Using Progressive Scan - Insignia NS-H4005 Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using progressive scan

The Progressive Scan option affects a TV connected to
COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the
back of your home theater system.
To use progressive scan:
1 Open the setup menu, then select Progressive Scan.
2 Press
, then press
If you connected an analog TV, select Off.
If you connected a progressive scan TV, select On.
3 Press MEMORY/ENTER save your change.
4 Press SET UP MENU, RETURN, or PLAY
Caution
If the connected TV is not a progressive scan TV and you
select On, no image will appear on the screen. You need to
reset the TV to turn off the progressive scan option.
To reset the TV and turn off the progressive scan option:
1 Make sure that there is not a disc in the disc tray. NO DISC should
appear in the display window.
2 Press and hold STOP
and the image reappears on the TV screen.
44
Insignia NS-H4005 Home Theater System
Off
Disc Audio
On
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Progressive Scan
5.1 Speaker Setup
Others
or
to select Off or On.
for five seconds. The option is turned off,
www.insignia-products.com
to close the menu.

Publicidad

Tabla de contenido
loading

Tabla de contenido