Speciic Safety - Lincoln 1800 Manual De Instrucciones

Ocultar thumbs Ver también para 1800:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewelery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewelery or long
hair can be caught in moving parts.
g) If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of dust collec-
tion can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which it
was designed.
b) Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled with
the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of start-
ing the power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool's
operation. If damaged, have the power
tool repaired before use. Many ac-
cidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Form 403994
Models 1800, 1842, 1842E, 1844, 1844E
5) Service
a) Have your power tool serviced by a

Speciic Safety

1. Always wear eye protection. The Power-
2. Use only Lincoln 1218, 1224, 1230 or
3. Avoid accidental starting. Be sure switch
4. Do not bend the hose so that it becomes
5. Replace the hose at the irst sign of wear,
Do not overreach. Keep proper footing and
balance at all times. Proper footing and
balance enable better control of the tool in
unexpected situations.
Use safety equipment. Always wear eye
protection.
Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used
for appropriate conditions.
Grease gun can develop high pressure - up
to 7,000 PSI (482 Bar). Use safety glasses
and gloves for protection during operation.
Keep hands clear of the exposed rubber
portion of hose.
PowerLuber Grease Gun
qualiied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Luber can generate up to 7,000 psi (482
bar).
1236 outlet whip hoses. Grease injection
injuries are a very serious injury. Hold the
hose only in the area of the spring guard.
is not depressed when inserting battery
pack.
kinked.
kink or damage to the outside jacket.
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Separate collection. This product
must not bedisposed of with
normal household waste.
Page Number - 3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

18421842e18441844ePowerluber a seriePowerluber 1800 ... Mostrar todo

Tabla de contenido