Service; Speciications; Tool Use And Care; Appropriate Use - Lincoln 1800 Manual De Instrucciones

Models 1800, 1842, 1842E, 1844, 1844E
PowerLuber Grease Gun
Any other use not in accordance with instruc-
tions will result in loss of claim for warranty or
liability.

Service

Tool service must be performed only by quali-
ied repair personnel. Service or maintenance
performed by unqualiied personnel may result in
a risk of injury.
When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of un-
authorized parts or failure to follow Maintenance
Instructions may create a risk of shock or injury.
SPECIFICATIONS
Basic PowerLuber Model 1800
Operating Power, Volt
Maximum Operating Pressure, PSI (bar)
- Low Output -
- High Output -
Grease Reservoir Capacity, oz. (g)
Operating Temperature Range, °F (°C) 0 to 120
Operating Current, Amp
Rated Current, Amp
Lubricant (Grease)
Grease output oz./min. (gram/min)
- Low Output (L)
- High Output (H)
Weight, Lbs. (Kg)
Accessories:
Battery NiCd Model 1801
Output, VDC
Capacity, mAh
Battery Charger Model 1410
Charge time
Input, VAC (2.0 A)
Battery Charger Model 1410E
Charge time
Input, VAC (2.0 A)
Outlet Hose Model 1230
Pressure Rating, psi (Bar)
Length of the Hose, In (mm)
Sound pressure (LpA) 73.5 dB(A), uncertainty (K) 3 dB(A)
Acoustic power (LwA) 84.5 dB(A), uncertainty (K) 3 dB(A)
Vibration emission value (ah) 1.0 m/s2, uncertainty (K)
1.5 m/s2
NOTE: Operating current and grease output data at 1,000
PSI (69 bar).
PowerLuber Performance
(at 72ºF (22ºC) with NLGI #2 grease
Output pressure, psi 0 1,000 2,000 3,000 4,000 5,000 6,000
Tubes of grease
(14.5oz (411gr)) per 12 10
one battery
Page Number - 4
18
7,000 (482)
3,000 (206)
14.5 (411)
(-18 to +50)
4.0
5.0
Up to NLGI #2
3.5 (99)
8.9 (252)
8.8 (4.0)
18
1900
1 Hour
120 V, 50-60 Hz
1 Hour
230 V, 50 Hz
7,500 (510)
30 (760)
5.5 4 2 1.5 <1
Extreme pressure may cause nozzle
extension or whip hose to burst. Use only
Lincoln APPROVED hoses and follow whip
hose instructions and warnings.

TOOL USE AND CARE

Do not use tool if switch does not turn it on or off.
A tool that cannot be controlled with the switch is
dangerous and must be repaired.
Do not continue to hold down trigger if grease
gun is stalled. This could damage the motor or
cause ire.
Disconnect battery pack from tool before making
any adjustments, changing accessories, or stor-
ing the tool. Such preventive safety measures
reduce the risk of starting the tool accidentally.
Store the tools out of reach of children and other
untrained persons. Tools are dangerous in the
hands of untrained users.
When battery pack is not in use, keep it away
from other metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal to
another. Shorting the battery terminals together
may cause sparks, burns, or a ire.
Maintain tools with care. Check for misalignment
or binding of moving parts, breakage of parts,
and any other condition that may affect the tool's
operation. If damaged, have the tool serviced
before using. Many accidents are caused by
poorly maintained tools.
Use only accessories that are recommended by
the manufacturer for your model.
Only accessories that are capable of handling
7000 PSI (482 bar) should be used. Accessories
that may be suitable for one tool may create a
risk of injury when used on another tool.

Appropriate use

The PowerLuber was exclusively designed to
pump and dispense lubricant using 18 volt bat-
tery power. The maximum speciication ratings
should not be exceeded.
Models and Components
Sales Model Basic PowerLuber Battery Charger
1842 1800
1842E 1800
1844 1800
1844E 1800
1801 1410
1801 1410E
1801(2) 1410
1801(2) 1410E
Form 403994