Lincoln 1800 Manual De Instrucciones página 9

4. The battery pack should be recharged when
it fails to produce suficient power on jobs
which were easily done previously. DO NOT
CONTINUE to use under these conditions.
Follow the charging procedure. You may
also charge a partially used pack whenever
you desire with no adverse affect on the bat-
tery pack.
5. Under certain conditions, with the charger
plugged into the power supply, the exposed
charging contacts inside the charger can be
shorted by foreign material. Foreign materi-
als of a conductive nature such as, but not
limited to, steel wool, aluminum foil, or any
buildup of metallic particles should be kept
away form charger cavities. Always unplug
the charger from the power supply when
there is no battery pack in the cavity. Unplug
charger before attempting to clean.
6. Do not freeze or immerse charger in water
or any other liquid.
Don't allow any liquid to get inside charger.
Electric shock may result. To facilitate the
cooling of the battery pack after use, avoid
placing the charger or battery pack in a
warm environment such as a metal shed or
an uninsulated trailer.
Never attempt to open the battery pack for
any reason. If the plastic housing of the
battery pack breaks or cracks, return to a
service center for recycling.
1410 or 1410E
Battery Charger
Figure 5
Form 403994
Models 1800, 1842, 1842E, 1844, 1844E
1401 or
1801
Battery
PowerLuber Grease Gun
Page Number - 9