Identifying Switch Settings On Wireless Receivers; Connecting The Rear Speakers - Bose LIFESTYLE 650 Guia Del Usuario

Identifying switch settings on wireless
receivers
Your rear speakers connect to wireless receivers to communicate with the console. The
receivers come preset to a left and right channel out of the box. You can use the switch
on the front of the receiver to adjust the channel settings.
1. Confirm that the switch on one wireless receiver is set to L (left).
2. Confirm that the switch on the other wireless receiver is set to R (right).
Note: Make sure that one wireless receiver is always set to L (left) and the other is set
to R (right).

Connecting the rear speakers

1. Place your speaker according to the "Placement guidelines" on page 11.
2. Connect and attach an OmniJewel™ base to an OmniJewel™ speaker
(see page 34).
3. Insert the other end of the two-pin cable into your wireless receiver.
You hear or feel a click.
4. Repeat steps 1 - 3 connect your other speaker.
A P P E N D I X A : I N S TA L L AT I O N R E F E R E N C E
E N G L I S H - 3 9