Erasing Steps Of Macro Programs - Marantz RC1400 Manual De Uso

Erasing Steps of Macro Programs

This example shows how to delete the TV and
INPUT steps from the following macro
programmed to M-01.
The program is changed from
DVD → PLAY → TIME → TV → INPUT → AMP
→ AUTO
to
DVD → PLAY → TIME → AMP → AUTO.
1
USE
4
NAME
MACRO
1
2
3
4
5
6
7
RC1400N 01 ENG
2 3
LEARN
MACRO
PAGE 1 PAGE 1 2
5 6
NAME
MACRO
PAGE 1 2
PAGE 1 2
Hold down the M button r for three
seconds or more.
The menu is displayed.
Press the D4 (MACRO) direct button t.
The macro menu is displayed.
The MACRO indicator displays and
Press the D1 (M-01) direct button t.
Press the D5 (EDIT) direct button t.
The LCD displays DVD, and the step position is
indicated by 7.
The programmed section is indicated by &.
cursor button @0 to display TV.
Press the
Press the CLEAR button !6 .
The LCD displays CLEAR, and TV and INPUT are
deleted.
When deleting steps from a macro program, the
operations performed for a source after switching to
the source are also deleted.
If the CLEAR button is pressed at the INPUT
position, only the INPUT step is deleted.
The & indicator for the step is also changed.
• To check the modified steps, press the
cursor button.
To exit, press the M button r.
When finished, to change another macro program,
press the OK cursor button to return to the menu, and
then repeat the procedure for steps 3 to 6.
32
Page 32
LEARN
MACRO
PAGE 1 2
NAME
MACRO
PAGE 1 2
LEARN blinks.
or
03.10.6, 4:19 PM
Adobe PageMaker 6.5J/PPC