4. Meter operation and display instructions
SET
Indicator definition:
1. "Main window" indicator: Light is on in the normal working state (non-set state),
otherwise it is off.
2."Auto-tuning" indicator: This indicator flashes when running the auto-tuning
program, otherwise it goes off.
3."RUN" indicator: This indicator is off when the timer is over, otherwise it stays on.
4."STOP" indicator: This indicator lights up when the timer expires, otherwise it
goes off.
5."Alarm" indicator: This indicator is on when there is a deviation alarm on
temperature or when the temperature measurement is abnormal. When there is a
deviation alarm under temperature, this indicator flashes. Under normal operation,
this indicator goes
6. "Heating" indicator: it lights up when heating there is output, otherwise it lights off.
7. "Light" indicator: it lights up when turned on, otherwise lights are turned off.
8. "Fan" indicator: Fan works when turned on, otherwise it is off.
9. "Sterilization" indicator: Lights up when turned on, otherwise it is off.
10. PV screen: current measurement value
11. SV screen: set parameter value
The PV screen will display the real temperature of the working room while the SV screen displays the
previously set temperature
[Light] key: Click this key to switch the lighting and the corresponding indicator lights up or goes out.
[Fan] key: Click this key to switch the fan and the corresponding indicator lights up or goes out.
6