Remote Control Pairing; Power Down - Ergomotion Contour Elite Gold Manual Del Usuario

remote control pairing

Remote Pairing
The original remote that comes in the box is already paired to the adjustable base. No further action is required. In the event that the
remote is not paired with the base, follow the steps below.*
STEP 1
Locate the Power Down Box and
press the button TWICE. A light
on the Battery Back Up Box will
illuminate.

POWER DOWN

Button
STEP 2
Remove the back cover of
the remote, press and hold
down the PAIR button. The
PAIR button will illuminate blue
and start flashing. When the
PAIR button stops flashing,
the illuminated light on the
Battery Backup Box will go out.
Release the PAIR button. The
remote is now paired to the
adjustable base.
STEP 3
Test all remote functions. If the remote buttons do not impact the
adjustable base movements, please repeat the process again or
call Ergomotion customer service: U.S. 1-888-550-3746
*ALTERNATE REMOTE PAIRING PROCESS!
Locate the Control Box (see base overview and quick
reference guide for corresponding base) and press the Reset/
Pairing button twice. A pairing LED light will illuminate green
on the Control Box. On the back of the remote, press and
hold the PAIR button. The PAIR button will illuminate blue and
start flashing. When the PAIR button stops flashing, the green
LED light on the Control Box will go out. Release the PAIR
button. The remote is now paired to the adjustable base.
PAIR
Button
Pairing
Reset/Pairing
Button LED Light
13