Set Zone Times Setup - Toro Lawn Master II Guía De Instalación Y Programación

SET ZONE TIMES Setup

The SET ZONE TIMES setup tells the controller how much time each station will be
activated (runtime).
Step 1 – Place the function dial to the SET ZONE TIMES
Step 2 – Press to select the program being modified. Select from
PRG
Step 3 – Press or
Step 4 – Press or
be active. Each station can have a runtime of one minute and up to six hours. For
unused stations, adjust the runtime to
Hours
Step 5 – Repeat steps 2–4 for the remaining stations and programs.
Step 6 – Return the function dial to
to select the Zone (station) number (1–6) being modified.
to adjust the desired time duration (runtime) you want the station to
Minutes
RUN
position.
0:00
.
when finished.
A B C
, or .